HABOTEST Multi-Function Network Cable Finder Tester(HT801B)

1. Signal transmission format: multi-frequency pulse signal 2. Output level: 8Vp-P 3. Connector type: RJ11, RJ45 4. Compatible network cables: CAT5, CAT6 5. Network cable compression detection speed: 1 second 6. Signal transmission distance: 3 kg 7. Input voltage protection: 60 V 8. Network cable detector: dupports detecting shielded and unshielded network cables on switches, routers, and other devices operating at voltages less than 60 V or without power. 9. Auto-power off: automatically shuts off after 30 minutes. 10. Power supply: 9V 6F22 Battery (Not Included) 11. After cable tracing is complete, a cable connection diagram is created to verify line connectivity and identify shorts, opens, and misconnected pairs, accelerating troubleshooting. 12. Primarily used to quickly detect through-hole faults, locate fault points, and mark lines. It can also be used to quickly determine if optical fiber is broken, excessively bent, or poorly connected. 13. Searchable 4/8-core network cables, coaxial cables, telephone cables, and shielded/unshielded network cables. 14. Quickly troubleshoot and locate breaks, shorts, or damage in the cable. Hold the receiver probe close to the cable. If you hear a "clicking" sound, this is normal. Move the probe along the cable. 15. If the sound stops, the line is broken. 16. Supports 60V operation. Detects whether an Ethernet cable (e.g., Cat5e/Cat6) is providing power to a PoE-powered device (e.g., IP camera, wireless access point). 17. Weight: Sensor 82g / Receiver 85g 18. Dimensions: Sensor 125x60x32mm / Receiver 190x47x30mm