FNIRSI 3.5 inch Touchscreen 60,000-count Handheld Digital Multimeter, Type:TMP-610S with Oscilloscope+Signal Generator

1. Equipped with a 60,000-count chip and low-temperature-drift voltage divider resistors for precise measurement. 2. Features a diode test function (with audible continuity beep) for quick assessment of diode condition. 3. 3.5-inch high-definition IPS touchscreen, offering rich colors and clear, sharp display. 4. Built-in 3000mAh high-capacity battery, providing an extended runtime of up to 10 hours. 5. Supports USB communication and firmware upgrades; allows for the export of waveform data for further analysis. Multimeter Specifications: 1. DC Voltage: 600mV/6V/60V/600V/1000V 2. AC Voltage: 600mV/6V/60V/600V/750V 3. DC Current: 600uA/6000uA/60mA/600mA/6A/10A 4. AC Current: 600uA/6000uA/60mA/600mA/6A/10A 5. Resistance: 600 ohm/6 Kohm/60 Kohm/600 Kohm/6 Mohm/60 Mohm 6. Capacitance: 60nF/600nF/6uF/60uF/600uF/6mF/60mF 7. Frequency: 10Hz-60MHz 8. Temperature: -40 to 100°C 9. Continuity: 0 ohm~1 Kohm 10. Diode: 0-3V, 0 ohm~1 Kohm 11. AC Frequency Response: 10kHz Oscilloscope Specifications (TMP-610S): 1. Real-time sampling rate: 48 MSa/s 2. Analog bandwidth: 10 MHz 3. Input impedance: 1 M ohm 4. Coupling mode: AC/DC 5. Test voltage range: 80 Vpp (with 1:1 probe), 800 Vpp (with 10:1 probe) 6. Vertical sensitivity: 1 mV/div-10 V/div 7. Vertical offset: Adjustable, with on-screen indication 8. Horizontal time base range: 50 ns-20 s 9. Trigger modes: Auto, Normal, Single 10. Trigger types: Rising edge, falling edge 11. Trigger level: Adjustable, with on-screen indication Signal Generator Specifications (TMP-610S): 1. Output waveforms: 13 types 2. Frequency: 0-50 kHz 3. Amplitude: 0.0 V-3.0 V 4. Duty cycle: 0-100% (adjustable for rectangular and sawtooth waves)